FORMALDEHYDE-FREE
EasyFit has revolutionized the building insulation industry by introducing an entire line of
formaldehyde-free fiber glass building insulation. EasyFit Formaldehyde-free insulation provides the same
high-quality thermal and acoustical properties as conventional fiber glass – just without the
formaldehyde-based binder. Why? Because it’s a smart thing to do for our customers and the environment.
Formaldehyde has traditionally been used as part of the binder in fiber glass insulation. Although there
is no health risk with the traditional product, formaldehyde at higher levels may cause irritation and
sensitivity. EasyFit Formaldehyde-free building insulation utilizes an innovative new acrylic binder that
eliminates binder-related formaldehyde emissions during manufacturing and, once installed, will not
off-gas formaldehyde in the indoor environment. No formaldehyde means fewer things to worry about.
Visit us at www.jm.com for more information.

PRODUCT DESCRIPTION
EasyFit thermal and acoustical fiber glass batts feature vertical perforations that allow installers to separate sections by hand, rather than cutting the batt, to fit non-standard-width framing cavities quickly and easily. The lightweight thermal and acoustical insulation is made of long, resilient glass fibers bonded with an acrylic thermosetting binder.

AVAILABLE FORMS
Each EasyFit package contains both standard and perforated batts to meet all your insulating needs.

APPLICATIONS
New Construction

• Wood frame construction – residential homes, light commercial
• Engineered wood construction – assemblies framed with 304 mm (12") to 487 mm (19.2") on-centre
  cavities, wide-spaced wood trusses or I-joists
• Interior wall sound control – interior walls and floor/ceiling assemblies
• Basement wall insulation
  

PERFORMANCE ADVANTAGES

• Formaldehyde-free – will not off-gas
  formaldehyde in the indoor environment.
• Fast, Easy Installation – installation is
  10 to 20 percent faster in sidewalls
  compared to normal fiber glass batts.*
• Fits Any Width Cavity – either as a whole
  batt or in a combination of pre-cut widths.
• Thermal Efficiency – provides effective
  resistance to heat transfer with R-values
  up to R-20 (RSI-3.5).
• Sound Control – reduces transmission
  of sound through interior walls and
  floor/ceiling assemblies.
• Fire-resistant and Non-combustible –
  (see Specification Compliance).
• Non-corrosive – does not accelerate
  corrosion of pipes, wiring or metal studs.
• Durable – unaffected by moisture, oil,
  grease and most acids. It will not rot,
  mildew or otherwise deteriorate.
• Resilient – bonded glass fibers will not
  pull apart during normal applications
  and resist settling, breakdown and
  sagging from vibration.
• Flexible – forms readily around corners
  and curved surfaces.
  *Based on comments from contractors participating in trials.
  

INSTALLATION
Vertical perforations allow batts to be torn to fit non-standard-width cavities for faster, easier
installation. It installs by simply pressing in place between studs. Fasteners may also be used. Wire
rods, chicken wire or wire is needed to hold floor insulation in place.

PACKAGING
EasyFit batts are compression-packaged for savings in storage and freight costs.

.

RECOMMENDED STORAGE AND TRANSPORT
Store insulation indoors. Keep insulation clean and dry at all times. When transporting, cover completely with a waterproof tarpaulin as necessary.

SPECIFICATION COMPLIANCE
Conforms to NBC 1995 Article 9.25.2.2 and to CSA A101-M
CCMC Evaluation Listing No. 12276-L
CAN/ULC-S702-97, Type 1
CAN/CGSB-51.11-92

SHORT FORM SPECIFICATIONS
All insulation shown on drawings or specified herein shall be “EasyFit Formaldehyde-free Fiber Glass Insulation” as manufactured by Johns Manville. Thermal
resistance “R” (RSI) values of the insulation shall be R (RSI)_____in walls.

LIMITATIONS OF USE
Check applicable building codes.

Technical specifications as shown in this literature are intended to be used as general guidelines only. The physical and chemical properties of EasyFit perforated thermal and acoustical fiber glass insulation listed herein represent typical, average values obtained in accordance with accepted test methods and are subject to normal manufacturing variations. They are supplied as a technical service and are subject to change without notice. Any references to numerical flame spread or smoke developed ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions Check with the sales office nearest you for current information. All Johns Manville products are sold subject to Johns Manville’s Limited Warranty and Limitation of Remedy. For a copy of the Johns Manville Limited Warranty and Limitation of Remedy or for information on other Johns Manville thermal and acoustical insulation and systems, call or write to the 800 number or address listed below.